Color: Daylight White
Size of LEDs: 2835
Length of a tape: 16.4ft
LEDs Quantity: 300
Working Voltage: 12V DC
Easy Installation. Self-adhesive back with adhesive tape for safe and easy application.
Safe to use. The working voltage is 12V. Extremely low heat. It is touchable and safe to children.
Cuttable and linkable. Easy to cut and use with Lighting EVER accessory. It can be cut every 3 LEDs along the cutting marks, without damaging the rest strips.
Flexible operations. Slim, compact and flexible PCB strip. Mount end-to-end for bendable or angled patterns, or in continuous rows.
Reduce re-lamp frequency. Lifespan is over 50000 hrs. Save effort and maintenance costs on changing lights frequently.
Eco-friendly. RoHS compliant. No battery. No lead or mercury. No UV or IR Radiation.
Applications: Ideal for holiday lighting (such as Christmas, Thanksgiving Day, Saint Valentine Day, Halloween, Weddings, Parties etc.), as well as decorative lighting for clubs, bars, garden, home, kitchen, studio, vehicle etc.
1 x 5M 2835 Non-waterproof Daylight White LED Striplight
2 x Strip-to-Strip Connector
1 x Strip to Power Connector DC Cable (15cm)
Please do not connect two or more 5m/16.4ft strip lights in series.
Please be kindly informed that the total wattage of LED strip lights should not exceed the max wattage of this adaptor.
Diameter of DC jack/connector: interior 2.1mm ; exterior: 5.5mm
Connecting power to single colour light strip without dimmer
24W/36W/60W Power Adapter (not included please search 5000067 5000028 or 5000030) + 5M LED Striplight (included)
Connecting two or more single colour strips with only one power in parallel
N*24W Power adapter + N-way DC splitter (easily get 1 on amazon) + N*5M LED light strips
The cut points can be found every 3 LEDs usually with solder pads.
You can simply cut to the desired length using a pair of scissors along the cut point line.
You can join/connect pieces of cut LED strip together using the solderless connector
1. Open the plastic housing up;
2. Slide both sides of the LED tape into the connector;
3. Clip-on the connector into place until you hear a snap.
Tips: please choose the right connector for your strip
Width: 10mm for 5050 tape 8mm for 2835 tape;
Pin: 2-pin for single colour strip 4-pin for RGB strip