Specification:
 LED type: SMD 5050
 LED quantity: 150 LED
 Strip length: 16.4ft(5m)
 Light color: RGB (Red Green Blue) changing
 Lifetime: 50,000+ hours
 Input: DC 12V
 Wattage: 24W
 Beam angle: 120 degree
 Dimension: 0.4inch(W)*0.08inch(H)
 Level : Non-Waterproof
 Power Supply: AC/DC ADAPTOR INPUT 100-240V; OUTPUT 12V 3.0A ; CABLE LENGTH: 4ft/1.2m.
 Features
 All Kits are ready to use. RGB LED strips, remote controller, power adaptor are included. No more accessories are required.
 Easy Installation. Plug and play without wiring.
 Ultimate customized mode.16 colors with 6 DIY keys - 44 keys infrared controller which has 6 DIY keys for memorizing the colors that you preferred.
 Well-distributed lighting. LED components are uniformly lined up. No flickering and dead lights in the strip even after a long time.
 Cuttable. Can be cut every 3 LEDs along the cutting marks, without damaging the rest strips.
 Flexible operations. Slim, compact and flexible PCB strip. Mount end-to-end for bendable or angled patterns, or in continuous rows.
 Safe to use. The working voltage is 12V. Extremely low heat. It is touchable and safe to children.

 44 key remote control
 Type: 44 Key Remote Controller
 Connection mode: Common Anode(+)
 Color: 16 Colors
 Control distance: 8m/ 26.25ft
 8 Light Pattern: Quick / Slow / Auto / Flash / 7 color fade change / 3 color fade change / 7 color jumpy change / 3 color jumpy change R / G / B increase and decrease  control

 What you get:
 1x 16.4ft/5m 5050 RGB 150 leds non-waterproof RGB strip light
 1x 44 key remote control
 1x 12V 3.0A 4ft/1.2m Power Supply
 1x easy to read manual
 Worry-free 12-month warranty
 Friendly, easy-to-reach customer service

 Application:
 Widely used for home, hotels, clubs, shopping malls.
 Holiday, event, show exhibition decoration.
 Auditorium walk stairway lighting, hidden groove, wine cabinet decor
 Amusement park, theater and aircraft cabin mood lighting
 Applicable for automobile, boat and bicycle decoration
 DIY Decoration, whatever and wherever you like! Indoor only!
Now click the \Add to Cart\" button to get your indoor decoration solution!

Environmental friendly: Low carbon no radiation no flicker and no pollution to human and environment. Safe and stable.

Note:

These strip lights cannot be connected in series.

Please unroll the strip light before light it up.

Connecting power to RGB light strip with remote controller

Connecting two or more RGB light strips with only one power in parallel

Please be kindly informed that the total wattage of LED strip lights should not exceed the max wattage of this adaptor.

 
Fixing
It comes with self-adhesive backing for quick and easy installation.
Peel off the backing press onto most clean and flat finish surfaces.

Cutting
The cut points can be found every 3 LEDs usually with solder pads.
You can simply cut to the desired length using a pair of scissors along the cut point line.

Connecting
You can join/connect pieces of cut LED strip together using the solderless connector (not included so you will need to buy it extra please search 5000071)
1. Open the plastic housing up;
2. Slide both sides of the LED tape into the connector;
3. Clip-on the connector into place until you hear a snap.

Tips: please choose the right connector for your strip
Width: 10mm for 5050 tape 8mm for 3528 tape; 
Pin: 2-pin for single colour strip 4-pin for RGB strip