Save electricity bill. Replace 40W fluorescent tube by 18W LED. Save 55% on electricity bill of lighting.
High CRI. CRI is over 80. More vivid and natural lighting.
Anti-glare lampshade with high light transmittance
Lower Maintenance Costs. Extremely long life reduces re-lamp frequency. Save your effort to replace bulbs in high ceiling.
Diameter is 14.17 inches. Height is 3.35 inches.
Eco-Friendly. No lead or mercury.
Solid State. Shockproof and vibration proof.
No Hazardous Emissions. No UV or IR Radiation.
Recommend installation area: any room with 129-161 square feet.
Application: Lighting for Living Room, Bedroom, Dining Room, Flush Mount Ceiling Lights.
1 x 18W LED Ceiling Light
4 x Screws
4 x Plastic screw anchors
If your room is about 96-129 square feet please search 1500014-WW 1500014-DW 1500015-WW or 1500015-DW.
How To Install:
Step 1: Open the lampshade by turning in counterclockwise.
Step 2: According to the screw bits on the lamp drill holes in the ceiling. And then insert the plastic screw anchors into the drilling holes.
Note (please place the lamp onto ceiling when in position draw the holes according to the screw bits before drilling):
4 screw holes for 1500011 / 1500013;
3 screw holes for 1500012 / 1500014;
2 screw holes for 1500015.
Step 3: Remove the original testing cord of the lamp by loosening the 3 crews in the wire connector of the lamp.
Step 4: Pass your power cord through the hole of ceiling lamp chassic. Then connect the Neutral Line Live Line and Ground wire of power cord into the corresponding wiring ports of the connector.
Step 5: Put 3 screws into the screw bits of lamp chassis and then fix the lamp chassis onto the ceiling.
Step 6: Put on the lampshade to lamp chassis by turning in clockwise.