Easy Installation. Come with self-adhesive backing for easy and safe application.
Safe to use. The working voltage is 12V DC. It is touchable and safe to children.
Cuttable and connectable. Can be cut and reconnected every 3 LEDs (5cm), without damaging the rest strips.
High brightness and low power consumption: 300lm/m,4.8W/m.
Flexible operations. Slim, compact and flexible PCB strip. Mount end-to-end for bendable or angled patterns, or in continuous rows.
Reduce re-lamp frequency. Lifespan is over 50000 hrs. Save effort and maintenance costs on changing lights frequently.
Eco-Friendly. No battery. No lead or mercury. No UV or IR Radiation.
Accessories included: 4 Strip connectors and 2 DC cables.
Accessories optional (not included): If you need extra connector and connecting clips, please search 5000021.
2 x 5M 2835 Non-waterproof Warm White LED Striplight
4 x Strip-to-Strip Connector
2 x Strip to Power Connector DC Cable
Please do not connect two or more 5m/16.4ft strip lights in series.
Please unroll the strip light before light it up.
How to Install Guide
Please be kindly informed that the total wattage of LED strip lights should not exceed the max wattage of this adaptor.
Diameter of DC jack/connector: interior 2.1mm ; exterior: 5.5mm
Connecting power to single colour light strip without dimmer
24W/36W/60W Power Adapter (not included please search 5000067 5000028 or 5000030) + 5M LED Striplight (included)
Connecting two or more single colour strips with only one power in parallel
N*24W Power adapter + N-way DC splitter (easily get 1 on amazon) + N*5M LED light strip
Please be kindly informed that the total wattage of LED strip lights should not exceed the max wattage of this adaptor
The cut points can be found every 3 LEDs usually with solder pads.
You can simply cut to the desired length using a pair of scissors along the cut point line.
You can join/connect pieces of cut LED strip together using the solderless connector
1. Open the plastic housing up;
2. Slide both sides of the LED tape into the connector;
3. Clip-on the connector into place until you hear a snap.
Tips: please choose the right connector for your strip
Width: 10mm for 5050 tape 8mm for 2835 tape;
Pin: 2-pin for single colour strip 4-pin for RGB strip